Started by frank, October 13, 2017, 14:50:13 pm
0 Members and 1 Guest are viewing this topic.
QuoteIn the rare case that the X12S will not start after flashing, reconnect the X12S to the PC and re-flash the system. If the X12S system is not recognized by the PC then there is a possibility that a bad flash process has hung the system and the battery needs to be disconnected for a few minutes to fully shut down the system and then re-flash. In some cases the battery may need to be disconnected until the flashing process is complete.
Quote from: Bad Raven on October 14, 2017, 17:42:20 pmFrank, hopefully its just your terminology, but I hope you have not used a charger on the Horus as you have stated, as the Horus has the charger built inside the case, and only a 12v power supply should be used.A few people have made that mistake (with the Taranis, too), so thought I should mention it if only to point others away from using one!
Page created in 0.103 seconds with 27 queries.